Back to guides

Buying NFC Tags Online: Read the Listing Before You Pay

A good NFC tag listing names the chip, the memory in user bytes, the tag type, the physical form and the lock state. Here is what each field tells you.

Published

A good NFC tag listing names the chip, gives memory in user bytes, states the tag type, describes the physical form and says whether the tag is locked. If one of those is missing, treat it as a warning, not a detail the seller forgot.

Here are the five fields to read before you pay, then a short test for when the pack arrives.

Quick summary

FieldA useful listing saysA vague listing hides
ChipNTAG213, NTAG215, NTAG216"NFC chip", "universal"
MemoryUser bytes (144, 504, 888)A total that sounds bigger
Tag typeNFC Forum Type 2, NDEF readyNothing at all
FormSize, adhesive, on-metal or notOnly a photo
Lock stateRewritable or locked"Secure", "protected"

Field 1: the chip name

"NFC tag" is not a chip. The name matters: it fixes everything else. NXP's NTAG213, NTAG215 and NTAG216 are NFC Forum Type 2 tags that follow ISO/IEC 14443 Type A and work at 13.56 MHz, so every phone with NFC can talk to them.

A listing that only says "NFC chip" or "works with all devices" leaves you guessing, and that's the one to skip. Cheap packs are also where fake chips turn up, so read how to spot a counterfeit NTAG chip before a bulk order.

Field 2: memory, total versus user bytes

This is where listings get creative with numbers. NXP's datasheet gives NTAG213, NTAG215 and NTAG216 144, 504 and 888 bytes of user read/write memory. Their total memory is larger: 180, 540 and 924 bytes, because some of it holds the serial number, lock bytes and configuration.

A seller quoting 180 bytes is describing the whole chip, not the space for your link or text. Plan around the user figure, and see NTAG213 vs NTAG215 vs NTAG216 to match it to your job.

Field 3: tag type and phone compatibility

The NFC Forum defines five tag types that differ in size, capacity, cost and functionality. For everyday jobs (a URL, a Wi-Fi record, a Shortcuts trigger) you want a tag that holds NDEF data, which the Forum specifies for all five types. Android's developer documentation notes that Android has the most support for NDEF, and that other tag technologies mean writing your own protocol handling. A listing that says "NDEF compatible" is giving you something you can use. One that stays silent isn't.

Field 4: form factor and surface

The chip does nothing without an antenna. NXP quotes an operating distance of up to 100 mm for NTAG21x, but says that depends on field strength and antenna geometry, so the finished sticker or coin decides your real range, not the chip.

Listings often skip the size, the adhesive and the surface. If you plan to stick it on a phone case, a fridge or a toolbox, look for a stated surface. Metal is the common failure, covered in NFC tags on metal.

Field 5: lock state, retention and write cycles

NTAG21x chips can be locked read-only page by page, and password protection is configurable. Locking is permanent, so a pack sold as "pre-locked" can't be rewritten, which suits a finished product and is useless for experiments. NXP specifies 10 years of data retention and 100,000 write cycles, so those are numbers a seller can back up.

Be wary of words like "secure" or "protected" with no mention of a password or lock.

How to put this into practice

Ask the seller anything the listing leaves open: chip name, user memory, locked or not. Then test on arrival instead of trusting the box. Open NFCore on your phone, scan one tag from the pack, and check the chip type, memory size and lock state it reports. Write a short record, read it back, then repeat with a second tag from the middle of the pack.

For a fuller test routine, see test new tags before you use them, and for the wider picture our practical buying guide. NFCore is free to try on iPhone and Android.

Frequently Asked Questions

What does 144 bytes mean on an NFC tag listing?

For NTAG213, NXP gives 144 bytes of user read/write memory out of 180 bytes total. A listing that says 180 is quoting total memory, not what you can store.

Is an NFC tag listing without a chip name safe to buy?

It is a gamble. Without a chip name you can't tell memory, compatibility or lock features, so ask the seller or pick a listing that names it.

Can a read-only NFC tag be rewritten?

No. NXP's NTAG21x chips can be locked per page, and locking is permanent, so a tag sold as read-only or locked cannot be changed.

How long do NFC tags keep their data?

NXP specifies 10 years of data retention and 100,000 write cycles for NTAG213, NTAG215 and NTAG216.