Back to guides

Custom Tonie Tags: What a Phone Can Read and What Needs TeddyCloud

A custom Tonie NFC tag must be a SLIX-L chip. Your phone can read its ID once, before the Toniebox switches on privacy mode; TeddyCloud does the rest.

Published

A custom Tonie NFC tag has to be a SLIX-L chip, and your phone can read its ID only before the Toniebox touches it for the first time. The phone gives you the tag's type and UID. The audio itself is assigned in TeddyCloud, a community server project, never written to the tag. If you want the background first, start with how Yoto and Toniebox cards work.

Quick answer

The community teddyCloud documentation says the Toniebox accepts only specific tags: type SLIX-L, privacy mode support, and a 16-character UID that starts with E0 04 03. It adds that only a specially patched version of the box's CC3200 chip accepts other SLIX tags.

So the job splits in two. Your phone handles the first half: finding out what the tag is and what its ID is. TeddyCloud handles the second: linking that ID to a source from your own audio library. NFCore sits in the first half only.

What your phone can read

Tonie figures contain a passive NFC chip that the Toniebox uses to recognize them. A library-systems help page from OCLC confirms this but does not name a standard, and we found no official Tonies specification that does either. We won't guess. Here is what a phone sees.

On Android, ISO 15693 tags show up through the NfcV class. The Android developer docs note that apps must build their own protocol stack on top of raw commands, because this is not an NDEF tag. In practice that means a reader app shows you the tag type and UID, and little else. Nothing about the audio is stored there.

For how phones cope with other toy and game chips, see the iPhone vs Android chart for game and toy tags and the guide to toys-to-life tag types compared. Tonie chips aren't NTAG215 amiibo chips, so don't carry assumptions across.

Step-by-step

1. Read and save the ID first

Most people miss this step. When a new tag is first placed on the Toniebox, the box automatically turns on privacy mode on that tag. After that, other NFC readers cannot recognize it. The documentation says privacy mode must be deactivated beforehand if you want to read the ID later, so read the tag with your phone before the first tap and save the UID somewhere safe.

2. Place the tag on the Toniebox

Put the new tag on the box. It will answer with an error code, and that is fine: no content is assigned yet. Open the TeddyCloud web interface and filter for the last played tags. The unknown tag you just tapped is the one you want.

3. Assign content

Click Edit on that tag, choose a source from your library, and click Save. Then press and hold one of the box's ears for 3 seconds to run a freshness check. After that, the tag should play.

4. Give it a name and picture (optional)

To change the name and picture, create a new Model in the tonies.custom.json file. In the TeddyCloud interface, go to Settings and choose Reload Tonies.json. Then edit the tag again, enter the model's unique ID, and save.

Common problems and fixes

The tag is the wrong chip. An NTAG sticker is the usual mistake, because NTAG chips are everywhere in other projects. They don't meet the SLIX-L requirement, so a stock Toniebox won't accept them. Our NTAG213 vs NTAG215 vs NTAG216 guide explains why those chips suit other jobs.

Your phone can't find the tag anymore. If the tag has already been on the Toniebox, privacy mode is likely on. That's by design, which is why the ID has to be saved before the first tap.

Reads are flaky when a second tag sits close to a figure. The OCLC page reports that two chips close together interfere, and that metal shields the signal. Keep a gap between them and avoid metal containers or lids. Shielding a figure's chip is described there as technically demanding, so don't plan around it.

Outdoor or wet use. If the tag will live in a bag or bath toy, read about waterproof NFC tags before you glue anything shut.

Doing this on NFCore specifically

Use NFCore to look at the tag before you commit: its type and its UID. That tells you whether you are holding a tag that fits the requirements above, and gives you the ID to paste into TeddyCloud. NFCore reads and inspects tags; it doesn't assign Tonie audio, and the app doesn't upload anything or ask for an account.

If you ever copy a tag, do it only with tags you own, for a personal backup, and respect the maker's terms. Never download or share dumps or key files.

Get NFCore for iPhone or Android.

Frequently Asked Questions

Can I use an NTAG215 sticker as a custom Tonie tag?

Not on a stock Toniebox. The teddyCloud documentation lists SLIX-L, privacy mode, and a 16-character UID starting E0 04 03 as the requirements. Only a specially patched CC3200 accepts other SLIX tags.

Why does my phone not see a tag after the Toniebox touched it?

The Toniebox turns on privacy mode the first time it sees a new tag, which makes the tag unrecognizable to other NFC readers. Read and save the ID with your phone before the first tap on the box.

Can NFCore write the Tonie audio to the tag?

No. The audio is linked to the tag's ID in TeddyCloud. NFCore helps you read the tag type and UID beforehand.