Back to guides

Valentine's Date Night Jar: NFC Tags That Open Ideas

A date night jar of NFC tags works like a paper jar, except each pick is a tap that opens a link, a note or a map. Here is how to set one up for Valentine's Day.

Published

Date night NFC tags: how the jar works

A date night jar of NFC tags works like the paper version, with one change: each pick is a tap. You pull a tag out of the jar, touch your phone to it, and the idea opens as a link, a short note, a map or a playlist. You write the tags once with an app such as NFCore, and the jar is ready for Valentine's Day or for every month after.

Below: what you need, what each tag can open, how to write them, and what to expect on iPhone and Android. A dozen tags takes about twenty minutes.

What a date night jar with NFC tags is

An NFC tag is a small passive chip with a coil. According to the NFC Forum, NFC tags are contactless memory cards that host a specially formatted data payload called an NDEF record (NFC Data Exchange Format), and most tap-based consumer uses are built on exactly that. The tag has no battery. The phone powers it for the moment of the tap, and the typical range is up to 2 cm, so you have to hold the phone right against it.

That short range suits a jar. Tags can sit in a pile, and nothing happens until you touch one with a phone on purpose.

A paper slip tells you the idea the moment you unfold it. A tag can open a page that sets the scene: a restaurant booking, a recipe, a map pin, a two-line note, a shared playlist. Because tags can be rewritten, the same jar also works next year with new ideas.

What you need

The list is short:

  • A dozen NFC tags. NTAG213 stickers or coins are the usual choice. NXP lists 144 bytes of user memory for the NTAG213, which is plenty for a short link or a one-line note. If you want longer notes, the NTAG215 has 504 bytes of user memory, of which 496 bytes are available for NDEF.
  • A jar or bowl. Anything opaque works. A clear jar is fine, as long as nothing on the tags gives the idea away.
  • A phone with NFC. Any recent iPhone or Android phone with NFC will do.
  • Small stickers or paper dots. If you use bare stickers, press each one onto a card or a wooden disc so it reads well and survives being shaken around.

Leave the tags blank on the outside. If you want to number them, number them by month rather than by idea, so the pick stays a surprise.

What each tag can open

Most tags will hold a URL, since a URL is the most flexible thing to put in a short NDEF record. A few ways to use that:

A link to a booking, a map or a recipe

Paste a restaurant reservation page, a map pin for a walk you want to take, or a recipe you plan to cook together. The tap opens it straight in the phone's browser or maps app.

A short text note

An NDEF text record holds a few lines and needs no internet at all. It suits a note like "Tonight: you pick the movie, I pick the snacks." If you like that idea, our guide to a love note text tag covers the details.

A shared playlist

A date can start with a song. Link to a playlist you both added to, and the tap becomes the opening scene. We wrote up the steps in a shared playlist tag.

A mix of all three

Twelve links to the same kind of page get dull. Put a few notes, a few maps and a few playlists in the mix.

Writing the tags with NFCore

You write each tag once, then check it with a tap.

  1. Open NFCore and choose to write a tag.
  2. Pick the record type: a URL for a booking, map, recipe or playlist, or text for a note.
  3. Paste the link or type the note.
  4. Hold the phone against a blank tag until the app confirms the write.
  5. Tap the tag again to read it back and check that it opens the right thing.

Do the read-back for every tag before the jar goes in the cupboard. It is the quickest way to catch a typo in a link.

NFCore runs on iPhone and Android, needs no account and does not upload your tags anywhere. You can get it on the App Store or on Google Play.

Lock or keep editable?

Tags have lock bytes. Once a tag is locked it can't be changed, which suits a jar you want to hand over finished. If you leave the tags unlocked, you can rewrite them later. NXP lists 100,000 write cycles and 10 years of data retention for the NTAG213, NTAG215 and NTAG216, so a tag will take many rewrites. For a jar you plan to reuse, leave the tags unlocked.

iPhone and Android: what to expect

On Android, tapping an NDEF tag generally opens its content with the screen on. iPhone has more conditions, so here are the limits.

Apple's Core NFC documentation describes background tag reading, which lets an iPhone scan a tag without opening an app. It has conditions:

  • The tag must be formatted with NDEF and contain a URL.
  • Background reading is read-only.
  • It works while the screen is on, and the phone must have been unlocked at least once after a restart.
  • Reading is suspended while Wallet or Apple Pay is in use, while the camera is in use and in Airplane Mode.

For a date night jar this is a good fit, since URL tags are exactly what iPhones read in the background. Plain text notes may need a different route on some phones, so test one text tag on both phones before you rely on it. If one of you uses an iPhone and the other Android, test each tag on each phone once.

Writing is a separate matter. Background reading is read-only, so you need an app such as NFCore to write the tags, on either platform.

Date idea starters

If you are short of ideas, here are a few that fit a tag well:

  • Dinner at home. A recipe link, plus a note about who does the dishes.
  • A walk with a destination. A map pin for a viewpoint or a café.
  • Movie night. A link to a trailer, with a rule that the picker also makes the popcorn.
  • Learn something. A link to a short video on a skill you both want to try.
  • The mystery tag. A text note that says "dress up, we are going out at seven."
  • A hunt around the house. Try a Valentine's scavenger hunt where the tag leads to the next tag.

Mix cheap evenings with one or two bigger ones, so the jar never feels like chores.

Make the jar a gift

A prepared jar makes a good present. Write the tags in advance, test them and tuck a small card in the jar that explains how to tap. For a first-time NFC user, add one line: hold the top of the phone against the tag for a second. Our guide to NFC gift tags has more on wrapping a tag so it arrives ready to use.

When the jar is empty, rewrite the tags with new ideas, or let the other person fill it for you. That is the real advantage over paper: the same dozen tags can carry a different year each time.

The short version

A date night jar of NFC tags turns a familiar idea into something you tap. Buy NTAG213 tags, write one idea to each, test every tag on every phone that will use it, and leave them unlocked if you want to reuse the jar. The whole project fits in an evening. NFCore handles the writing on both iPhone and Android.

Frequently Asked Questions

How many NFC tags do I need for a date night jar?

One tag per idea. Twelve is a good start for a monthly date over a year, or fourteen if you want a countdown to Valentine's Day.

Will the tags work on both iPhone and Android?

Tags that hold a URL do. iPhones can read them in the background with the screen on, and Android phones read NDEF tags generally. Writing the tags needs an app such as NFCore on either platform.

Can I change the ideas later?

Yes, as long as you have not locked the tag. NXP lists 100,000 write cycles for NTAG213, NTAG215 and NTAG216 chips, so one tag can be rewritten many times.

Do the tags need a battery?

No. NFC tags are passive. The phone powers them for the tap, at a typical range of up to 2 cm.