Back to guides

Furnace Filter Log: An NFC Tag That Tracks Winter Changes

A furnace filter NFC tag log is a sticker by your furnace that opens your last change date and filter size with one tap. Here is how to set it up for winter.

Published

A tag on the furnace that remembers your last filter change

A furnace filter NFC tag log is a small sticker near your furnace that opens a short note when you tap it with your phone: the filter size, the date you last changed it, and what to buy next. It won't send reminders by itself. What it does is answer the question everyone asks in January: "When did we last change this thing?"

Winter is when the answer matters most. The furnace runs more, and This Old House notes that the filter can get dirty quickly as a result, so it should be checked more often. This guide covers the schedule the sources suggest, what to write on the tag, where to put it, and how to change the filter safely.

How often to change a furnace filter in winter

There's no single number, because it depends on the filter and the house. Here's what three sources say.

What the sources say

  • ENERGY STAR tells homeowners to inspect, clean or change air filters once a month in a central air conditioner, furnace or heat pump. It adds that a dirty filter can increase energy costs and damage your equipment, leading to early failure.
  • Carrier generally recommends changing air filters about every three months. A 1-inch filter may need changing about monthly (30 to 60 days), while a 4-inch filter typically lasts around six months. Some high-capacity filters may last up to a year.
  • This Old House says most manufacturers recommend every 90 days, with a typical suggestion of every 60 to 90 days, and advises checking monthly in winter and changing whenever the filter looks dirty.

A workable winter rule: check the filter monthly, and change it on the schedule for its thickness or when it looks gray and clogged, whichever comes first. The tag is where you keep that rule and the dates.

Why your home may need it sooner

Carrier says homes with pets, smokers, recent renovations or family members with allergies may need more frequent changes. This Old House says the same about heavy shedding pets and allergy season. Higher MERV filters trap more, but they add airflow resistance and need more frequent changes. Most residential filters fall between MERV 7 and 12, and Carrier notes that MERV ratings run from 1 to 16, so match the filter to what your system is built for.

Signs the filter is overdue

  • Gray, dusty buildup you can see on the filter
  • More dust around the house than usual
  • Longer heating cycles or weak airflow from the vents
  • Uneven heat between rooms
  • A burning smell when the furnace kicks on (This Old House lists this one)
  • You cannot remember the last change, which is the problem the tag solves

What a furnace filter NFC tag log can do

An NFC tag is a passive chip with no battery and no clock. When your phone touches it, the phone reads whatever is stored on it. For a furnace log, that gives you three useful jobs.

One tap, three jobs

  1. Show a note. A plain text record such as Filter 16x25x1, MERV 8. Changed 2026-11-18. Next check: monthly. opens right on your phone screen.
  2. Open a link. The tag can hold a URL to your own notes page, a shared family note or a product page for the exact filter you buy.
  3. Start an automation. On iPhone, a Shortcuts personal automation can trigger when the tag is tapped, for example to add a reminder for 90 days out. On Android, a task app can do the same.

What a tag cannot do

A tag can't remind you on its own. It has no clock and can't message you. The reminder comes from your phone: a calendar entry, a Reminders item, or a Shortcut that the tap triggers. If the tag says "Changed 2026-11-18" and nothing else prompts you, it's just a sticky note. A handy one, but still a sticky note. Pair it with a monthly phone reminder.

Pairing with other routines

If you already run household checklists this way, the same idea scales: see one tag per room for a cleaning routine and tap-to-log habit tags. The furnace tag is one more stop on the round.

Setting up the tag near the furnace

Choose the tag and the spot

An NTAG213 sticker is plenty. It has 144 bytes of user memory, which holds a short text note with room to spare. Keep the note short and you can rewrite it at every change.

Furnaces are metal, and metal can detune the antenna in a standard sticker so the phone reads it poorly or not at all. Use an on-metal tag, or put a thin non-metal spacer between a regular sticker and the cabinet. Place it on the side of the cabinet or the wall nearby, within easy reach, not on the filter slot cover where it gets handled and peeled. Keep it off hot surfaces such as the flue and the heat exchanger area. Then test the read from the distance you will actually stand.

For a similar log kept somewhere else, the winter tire pressure log follows the same pattern in a glovebox.

Write the note in NFCore

  1. Open NFCore and choose the write option.
  2. Pick a text record and type the note: filter size, MERV rating, last change date and the check interval you picked.
  3. Hold the back of your phone against the tag until the write confirms.
  4. Tap the tag again to read it back and check the text.

Anyone who taps the tag can read what is on it, so keep it to filter details. Do not put passwords or personal information on it. NFCore does not track you, needs no account and does not upload anything to the cloud, so the note stays on the tag and your phone.

Leave the tag unlocked. Each time you change the filter, you will rewrite the date. Lock it and you can't edit it again.

How to change the filter safely

When you tap the tag and the date says it is time, these are the steps in Carrier's guide:

  1. Locate the filter. It is usually in the blower compartment or in the ductwork leading into the furnace.
  2. Turn the system off at the thermostat or at the power switch on the furnace cabinet.
  3. Remove the blower cabinet door or the duct access panel.
  4. Note the airflow arrow on the old filter. Air should flow from the ductwork into the furnace.
  5. Slide the old filter out.
  6. Insert the new filter with the arrows pointing the same way, toward the blower motor.
  7. Put the cover or panel back securely.
  8. Restore power and confirm the furnace runs normally.

Check the size before you buy a replacement, since it has to match what your unit needs. Carrier also warns that a filter installed backward can restrict airflow quickly and potentially overheat the system, so check the arrow twice.

Finally, tap the tag and rewrite the date. It takes ten seconds, and it's the whole point of the log.

The takeaway for this winter

Check your furnace filter monthly, change it on the schedule for its thickness or when it looks dirty, and keep the facts on a tag you can tap instead of in your memory. If you already use NFCore, writing the note takes a minute. If not, you can get it on the App Store or Google Play and write your first tag today. Add a monthly phone reminder, and the tag does the rest.

Frequently Asked Questions

Can an NFC tag remind me to change my furnace filter?

A tag cannot send a reminder by itself, because it has no battery or clock. It opens a note, link or shortcut when you tap it. The reminder comes from your phone: a calendar or Reminders entry, or a Shortcuts automation, with the tag as the place you check the last change date.

Should I store the last change date on the tag itself?

You can write a short text record such as "Changed 2026-11-18, 16x25x1" and rewrite it each change. Keep it short, since a basic tag holds a few hundred bytes at most, and leave the tag unlocked so it stays rewritable.

Will the tag work on a metal furnace cabinet?

Metal can detune the antenna and block reads. Use an on-metal tag or put a thin spacer between a standard sticker and the cabinet, then test the read before you rely on it.

How often should I check the filter in winter?

ENERGY STAR says to inspect, clean or change furnace filters once a month. Carrier says about every three months for a typical filter, and a 1-inch filter may need changing every 30 to 60 days.