Giving Tuesday Donation Tag: One Tap to Your Fundraiser Page
GivingTuesday is December 1, 2026. Here is how a small charity, school or club can put an NFC tag on a jar or flyer that opens the donation page in one tap, and how to lock it safely.
Introduction
An NFC tag on a collection jar or flyer can open your donation page with one tap, and you can set one up in about ten minutes with a phone and a cheap NTAG213 sticker. GivingTuesday falls on Tuesday, December 1, 2026 (the Tuesday after US Thanksgiving), which makes it a good deadline for a small charity, school or club to try this.
Below: what to write on the tag, which chip to buy, whether to lock it, and how to keep a printed QR code beside it as a backup.
What a donation tag does
An NFC tag stores a small NDEF record. For this job the record is a plain web link (an https URL). When someone holds a phone near the tag, the phone reads the link and offers to open it in the browser. There is no app to install and no account to create on the giver's side.
That's the whole feature. One tap, one page. Android reads standard NDEF link tags in the background. On newer Android versions the phone may show an "open link" prompt that needs one extra tap before the page loads. iPhones can read tags too, but behaviour depends on the model and settings, so test with a couple of phones before you print anything.
A tag is a shortcut, not a replacement. Keep the web address and a QR code on the same flyer, so a donor whose phone doesn't react still has a way to give. GivingTuesday itself says there is no single way to take part: giving, volunteering and sharing all count. A tag just removes a few steps for the people who want to give.
Pick a tag
For a single link, the cheapest common chip is enough. NXP lists user memory of 144 bytes for the NTAG213, 504 bytes for the NTAG215 and 888 bytes for the NTAG216. A short https link needs a few dozen bytes, so an NTAG213 holds it with room to spare. Our guide to NTAG213 vs NTAG215 vs NTAG216 explains when the bigger chips are worth the money (for most donation jobs, they aren't).
NXP also quotes a data retention time of 10 years and write endurance of 100,000 cycles for this chip family, so a tag you stick on a jar this month will outlast the campaign by a wide margin.
Practical buying notes:
- Buy a sticker or card form factor that suits where it will sit. Paper labels are fine for a flyer. A jar lid needs a tag you can stick flat.
- Order a few extra. You will want spares for testing and for the day somebody peels one off.
- Check that the tags are genuine NTAG chips. Our guide on how to spot a counterfeit NTAG chip helps if you are buying in bulk.
Write a short link
Use a short, stable address
The shorter and steadier the link, the better. Two habits help:
- Point the tag at a page or redirect on your own domain, for example
yourcharity.org/give, instead of the long address your donation platform gave you. That page can forward to wherever the real fundraiser lives. - Use https and the exact address. A typo is an easy way to ruin a tag, and you can't fix it once the tag is locked.
Since the tag points at your own address, you can change the destination later (a new campaign, a year-end appeal, a different platform) without touching a single printed flyer.
Write it with your phone
Open an NFC writer app, choose "write a link" (a URL record), paste the address and hold the tag to the back of the phone. Our step-by-step guide on how to write an NFC tag with your phone walks through it on both iPhone and Android. If you want an app that can write, read and check tags in one place, NFCore does that, and you can find it in the App Store and on Google Play.
Test before you print
Tap every tag on at least one iPhone and one Android phone, with the screen on and the phone unlocked. Then read the tag back and confirm the address matches what you meant to write. Do it before the flyers go to the printer, not after.
Lock the tag or keep the target editable
Locking a tag makes it read-only. NXP describes field-programmable read-only locking on these chips: the first 16 pages lock per page, and higher pages lock per double page on the NTAG213. The chip family also offers a 32-bit password protection option, which is a different mechanism from a permanent lock.
Whether you should lock depends on one question: do you control the page the tag points to?
- Yes, it's your own redirect. Locking is safe. Nobody can overwrite the tag, and you can still change where the redirect goes. This is the setup we recommend for donation tags, because a jar sitting on a counter for a month can be rewritten by anyone with an NFC app, and a locked tag can't be.
- No, it points straight at a third-party page. Don't lock yet. If the platform changes its address or the fundraiser closes, you'll have a dead tag you can't rewrite.
If you do lock, the step can't be undone, so double-check the link first. Our guide to locking an NFC tag permanently covers the trade-offs, and password protection vs permanent locking explains the middle option. You can also check whether a tag is really read-only once you've locked it.
One more reason to lock: someone rewriting a donation tag to point at a different page is the main risk of an unlocked tag on a public jar. Tell people the address printed on the flyer is the one to trust.
Add a QR code fallback
Print the QR code and the short web address next to the tag. The QR code works for phones that don't read tags, and the printed address works for everyone else. If you're deciding how much space to give each, our comparison of NFC vs QR code lays out where each one wins.
Add a line of plain text next to the tag, such as "Tap here to give" with a small arrow or icon. People walking past a jar don't know that a sticker is a tag unless you say so.
Where to put the tag
- On the jar or box lid, away from metal. A metal lid or a metal coin slot right behind the tag can weaken the signal, so test the exact spot. A tag made for metal surfaces fixes this.
- On a table sign or flyer, at about chest height if it's on a wall, so people can tap without bending.
- Outdoors, use a tag with a proper weatherproof rating. Our guide to waterproof NFC tags explains what the ratings mean.
- Keep the range in mind. NXP quotes an operating distance up to 100 mm for these chips, but a phone case or a thick lid shortens that in practice, so give people a clear spot to tap.
Conclusion
A GivingTuesday donation tag comes down to four decisions: an NTAG213 sticker, a short https link on your own domain, a lock once the address is tested, and a QR code beside it. Do the test on two phones, print the flyers, and put a date in the calendar to review where the link points after December 1.
Frequently Asked Questions
When is GivingTuesday 2026?
Tuesday, December 1, 2026. GivingTuesday always falls on the Tuesday after US Thanksgiving.
Which tag should I buy for a donation link?
An NTAG213 is enough. It has 144 bytes of user memory, and a short https link needs only a small part of that.
Should I lock the tag?
Lock it only if the link points to a page or redirect you control. Locking is permanent, so test the link first, and don't lock a tag that points straight at a third-party page you may need to change.
Do donors need an app to use the tag?
No. A standard link tag opens in the phone's browser. Keep a QR code and the printed web address next to it for anyone whose phone doesn't react.