How to Tell If an Amiibo or Amiibo Card Is Fake
No single test proves an amiibo is real. Combine the model number, the print and sculpt, a scan, and a chip check, and know what each one can and can't show.
The short answer
No single test proves an amiibo is real, but four checks together catch most fakes: the model number on the bottom, the print and sculpt quality, whether it scans, and what the chip inside reports. The same goes for amiibo cards. Start with the cheapest check and work down.
Check the model number first
Nintendo's own support page tells you to look on the bottom of the figure or card for the number NVL-001 or NVL-201. If neither number is printed there, Nintendo says it is not a licensed accessory.
It's the fastest test, and it works on cards too. The catch: a printed number is only ink. A careful counterfeiter can copy it, so a correct number is a good sign, not proof.
Look at the box, paint and sculpt
Fakes often give themselves away in details you can see without any tech. Reports on early counterfeits described washed-out colours, different plastics with a different texture, and softer moulding. One example was a Pikachu whose arms melded into its body. Others had wrong proportions, such as a squashed face or an overlong neck.
Compare against photos of a figure you know is genuine, and look at:
- Paint edges, eyes and small printed details, which are often fuzzy on fakes.
- Whether the base and figure feel like the same plastic as other amiibo you own.
- The packaging. Fakes were reported in boxes quite different from Nintendo's own.
- The listing. Photos without any box, or stock images only, deserve a second look.
Those reports date from the first wave of fakes. Newer copies can be better, so a clean result is only one point in the figure's favour.
Does it scan? Rule out your reader first
Early counterfeits often had no NFC chip at all, so a figure that never scans is suspicious. A failed scan doesn't prove a fake, though. Work through Nintendo's checklist before you decide:
- Remove any cover from the right Joy-Con. On a Switch, the touchpoint sits over the right stick. On the Pro Controller it is over the Nintendo Switch logo at the top centre.
- Hold the amiibo still on that spot.
- Reset its data in System Settings, under amiibo.
- Try a different amiibo on the same controller, then your original on another controller.
If other amiibo scan and yours does not, Nintendo says the figure is likely faulty. That could be damage or a fake, and the scan alone can't tell you which.
Scan it and read the chip
A phone can look at the chip itself. Genuine amiibo use an NTAG215 chip, which NXP lists with 504 bytes of user memory, a manufacturer-programmed 7-byte UID and an ECC-based originality signature.
In NFCore you tap the figure or card and read what the chip reports: the tag type, the memory size and the UID. Use it as a sanity check:
- A chip that reports a different type or a much smaller memory than NTAG215 does not fit an amiibo.
- A 4-byte UID instead of 7 bytes is another mismatch.
- A figure with no readable chip at all matches the old no-chip counterfeits.
NFCore reads and checks these tags. It does not make working amiibo. If you ever copy a tag, only copy ones you own, for personal backup, and respect the game maker's terms.
What a scan cannot prove
A matching chip type is encouraging, but it doesn't prove authenticity. A fake can be built on a plain NTAG215, which is a common and cheap chip, and a reader app can't prove the data on it came from Nintendo. For the wider problem, see how to spot counterfeit NTAG chips. And if you want to know what an iPhone can and can't do with these tags, read what an iPhone can do with amiibo.
So think in terms of evidence. A correct NVL number, clean paint, a normal scan and a chip that reports NTAG215 all point the same way. One red flag deserves a closer look. Two or three, walk away.
Buying safely and your next step
Pay with a method that offers a refund, such as PayPal, ask the seller for photos of the bottom of the figure and the box, and be wary of rare figures priced far above others. If you already own a doubtful one, download NFCore for iPhone or for Android and read its chip.
Frequently Asked Questions
Can a fake amiibo still scan?
Yes. A copied chip can carry data that a console accepts, so a successful scan only rules out the crudest fakes. Use the model number, print and seller history together.
Does every amiibo card have NVL-001 or NVL-201?
Nintendo's support page says to look for NVL-001 or NVL-201 on the bottom of the figure or card, and calls anything without one unlicensed. Check the back of the card if the number is not on the front.
My amiibo will not scan. Is it fake?
Not necessarily. Remove any cover, hold it still on the right spot, reset its data, and try another amiibo or controller. If others work, the figure may be faulty.
Can NFCore make a working amiibo?
No. NFCore reads and checks tags, it does not make working amiibo. If you copy a tag, only copy ones you own, for personal backup, and respect the game maker's terms.