Back to guides

Make Your Own NFC Board Game: Tags, Tiles and a Phone Tap

A DIY NFC board game is a normal board with a tag under each tile. Tap a tile with your phone and it shows what happens next. Here is how to build one.

Published

Quick answer

A DIY NFC board game is an ordinary board, cards or tiles with a cheap NFC tag hidden under each one. A player taps the tile with a phone, and the phone shows or does whatever you decided that tile means: a question, a trap, a bonus move. You need a handful of NTAG213 tags, a phone, and a rule sheet. If you like trail-style play, our NFC scavenger hunt guide covers a close cousin of this idea.

Step-by-step

1. Decide what a tap does

Write the rules first. Keep each tile to one effect: "go back two spaces", "answer a question", "roll again". A tile with one clear job is easier to program and easier to explain at the table.

2. Pick and count your tags

Buy one tag per tile or card, plus two or three spares. NTAG213 is enough: NXP lists 144 bytes of user memory for it, and a tile ID or a short sentence takes a fraction of that. The same NXP page rates the family for 100,000 write cycles, so you can rewrite a tag every time you change a rule. If you want the full comparison, see NTAG213, NTAG215 and NTAG216.

3. Write each tag

Give every tile its own tag with its own content. Two easy options:

  • A text record such as "Tile 7: swap places with the player behind you". It works on any phone that reads the tag, with no app logic needed.
  • A link record that opens a page you control, one URL per tile.

Write them one at a time and label the back of each tag with the tile number in pencil, so you can match them when you glue them down.

4. Make the phone react

On iPhone, use a personal automation in Shortcuts with the NFC Tag trigger. Apple's Shortcuts guide says that, other than its unique identifier, the contents of the tag are ignored, and that you can name the tag after the first scan. So on iPhone each tile triggers its own shortcut, and the shortcut holds the effect (a notification, a dice roll, a score update). Our iPhone Shortcuts NFC automation guide walks through the setup.

On Android, the phone reads the first NDEF record of the tag to decide what to do. A text record opens in a reader app, and a link record opens in your browser. That's the simplest route if all you want is "tap, read the card".

5. Build the board

Put the tag under a layer of card or paper, flat and not folded. NXP gives an operating distance of up to about 100 mm, depending on field strength and antenna size, but in practice a phone reads a small tag reliably only within a few centimetres. Keep the layer on top thin. Leave a gap of a few centimetres between tags so one tap does not catch two of them.

Common problems and fixes

  • Two tiles read at once. Space tags further apart or turn them so they are not stacked under neighbouring tiles.
  • Android shows an extra step for link tags. Android's NFC documentation says that from Android 16 a tag that stores a web link opens through the normal link handler, and from Android 17 the phone shows an "open link" notification that the player must tap. If you want a pure one-tap game on newer Android, use text records instead of links.
  • A player has blocked an app. Android 16 lets users stop an app from receiving tag scans, under Settings, Apps, Special app access, Launch via NFC.
  • iPhone ignores what you wrote. That's expected. The Shortcuts trigger matches the tag, not the content.
  • Spills and sticky fingers. Use waterproof tags if the game will see drinks.
  • Store-bought game tags are a different job. Amiibo, Skylanders and LEGO Dimensions use their own chips and rules, and an iPhone cannot read MIFARE Classic at all. See which game tags a phone can read. If you ever copy a tag, only copy tags you own, for personal backup, and respect the game maker's terms.

Doing this on NFCore specifically

NFCore reads and writes NTAG213 tags on both platforms, and lets you check what a tag holds before you glue it down. Write every tile, then scan each one back to confirm the text. NFCore can read and check game tags such as amiibo, but it cannot make working amiibo. Get it for iPhone or Android.

Frequently Asked Questions

How many tags do I need for a board game?

One per tile or card you want the phone to recognise, plus a spare or two. A simple 20-space path needs about 20 tags.

Which tag should I buy?

NTAG213 is enough. A tile ID or a short text record fits easily in its 144 bytes of user memory.

Can I copy a store-bought game's tags?

Only copy tags you own, for personal backup, and respect the game maker's terms. NFCore can read and check game tags, but it can't make working amiibo. For toys that play audio from cards, see how Yoto and Toniebox cards work.