Tap-to-Play Christmas Cards: Add an NFC Tag to Greeting Cards
Hide an NFC tag inside a Christmas card so one tap plays your video greeting. Pick the tag, write the link, place it and test on iPhone and Android.
The short version
Stick an NFC tag inside a card, write a link to your video on it, and the person who opens the card taps it with a phone to watch your greeting. That's the whole trick behind NFC Christmas greeting cards. The tag holds a link, not the video, so the real work is choosing the tag, hosting the video, and testing before you seal the envelope.
Pick the right tag
For one link, an NTAG213 is enough. NXP lists it with 144 bytes of user memory, and NTAG215 and NTAG216 with 504 and 888 bytes. All three follow the NFC Forum Type 2 tag standard and ISO/IEC 14443 Type A. A short web address takes a few dozen bytes, so the bigger chips buy room you won't use. For the full comparison, see NTAG213, NTAG215 and NTAG216.
Look for a thin sticker or inlay rather than a thick coin tag. A card is flat, and a bump under the paper is easy to feel. NXP gives an operating distance of up to 100 mm for these chips, though it depends on the phone's field strength and the antenna size. Small tags couple a little less strongly, so plan to tap close.
Host the video and keep the link short
The video doesn't go on the tag. Upload it somewhere you control, such as an unlisted page or a private share link, and copy the address. Shorter is better: the link has to fit in the tag's memory, and a short address is easier to print as a backup.
Tags last well enough for a keepsake. NXP quotes 10 years of data retention and 100,000 write cycles for this chip family. But the tag only points to your page. Delete the video, and the card stops working.
Write the link with NFCore
Open NFCore on the App Store or on Google Play, choose the write option, add a URL record, paste your video link and hold the phone against the tag until the app confirms the write. A URL record is an NDEF record, the format phones expect from a tag that opens a web page. Other writer apps, such as NFC Tools, do the same job.
Read the tag back once to check the link. To keep the card exactly as you wrote it, lock the tag after testing. A locked tag can't be edited again.
Place the tag inside the card
Glue or tape the tag to an inner page, or sandwich it between two sheets of paper. Pick a flat spot away from thick embellishments, and print a small "Tap here with your phone" mark on top so the recipient knows where to aim. Our first-tap walkthrough for gift recipients covers what to tell people who've never tapped a tag.
What the recipient's phone does
On Android, the phone looks for tags while the screen is unlocked and NFC is on. According to Android's developer documentation, from Android 16 a tag that stores an http or https link triggers a view action, and from Android 17 the phone shows an "open link" notification that needs a tap before the page opens.
On iPhone, background tag reading is supported from the iPhone XS onward. It reads NDEF tags that carry a URL record and shows a notification. It doesn't work with Airplane mode on or while the camera is open, so check those first if nothing happens.
Either way, expect one extra tap on a notification. Tell the recipient to hold the top of the phone against the marked spot and wait a moment.
Test it and add a printed backup
Test the finished card with a phone that isn't yours, with and without a case. A thick case weakens the connection, and removing it often fixes a card that seems dead. If the tap fails, nudge the tag and try again.
Then add a fallback: print the short link, or a QR code, on the card. That covers older phones, phones with NFC switched off, and relatives who simply prefer scanning. Our guide to NFC versus QR codes explains when each makes sense. We have no tested guidance on how tags hold up in the mail, so if the card travels, the printed backup is your safety net.
Wrap-up
Choose an NTAG213, host your video, write the link as a URL record, tuck the tag flat inside the card, and test it on a second phone. With a printed link on the card, the greeting still plays even if the tap doesn't.
Frequently Asked Questions
Can the video be stored on the NFC tag itself?
No. An NTAG213 holds 144 bytes of user memory, enough for a short web link. The video lives on a page you host or share, and the tag points to it.
Do I need an app to read the card?
Not for the recipient. Recent iPhones and Android phones read NDEF tags with a link and offer to open it. You only need an app such as NFCore to write the link.
Will the card still work after it goes through the mail?
We have no tested guidance on postal handling, so test the card after it arrives if you can, or ask the recipient to tap it and tell you. Keep the printed fallback on the card either way.
Which tag should I buy?
An NTAG213 is enough for one link. NTAG215 and NTAG216 give more memory, but you don't need it for a single URL.