Gift Card or Tag Kit? Setting Up NFC Gear You Just Ordered
Card-shaped tags and sticker kits use the same kind of chips. Here is how to check, write and test them in your first hour, and when to lock them.
Whether your order is a card-shaped NFC tag or a bag of stickers and keyfobs, the setup is the same: check that your phone does NFC, find its antenna, read the tag before you write to it, write one link, test it, and lock it last. That's your whole first hour, on iPhone or Android.
Card, sticker or keyfob: what is in the box
A card, a sticker and a keyfob can all carry the same chip. What changes is the shape. Cards are thicker and survive a wallet or a desk drawer. Stickers go on surfaces. Keyfobs hang on bags and keys. The NFC Forum defines five tag types, and while they differ in protocol and data structure, it says the overall behavior for the user is identical. So you don't need five workflows.
What does matter is the chip printed on the packaging, because it sets how much you can store. Our guide on how much each chip can store covers that, and the buying guide explains what to look for in a listing.
Shape also affects placement. NFC works at 13.56 MHz with a typical range of up to 2 cm, so whatever you stick or carry has to sit close to the phone when it is used.
Step-by-step
1. Confirm your phone does NFC and find the antenna
Most recent phones have NFC, but the antenna is small and its spot varies. Read where your phone's NFC antenna sits and note it. A thick case or a metal plate behind the tag can block the tap. Planning to stick tags on metal? You'll need a tag built for it.
2. Read the tag before you write
Open NFCore and scan a tag straight out of the package. You will see the chip type, its capacity and whether it already holds a record. Reading first tells you whether the tag is blank, whether it's the chip you ordered, and whether your phone can talk to it at all.
3. Write one record and test it
Write a single URL or a short text record. Keep it simple. The goal is to confirm the loop works: write, tap, see the result.
Then test on the phones you care about:
- Android: the system reads the tag and decides what to open from the first record. Android has its strongest support for NDEF, the standard format for tag data. On newer Android versions, a link tag may show an "open link" prompt instead of opening straight away, so a prompt is not a failure.
- iPhone: background tag reading works on iPhone XS and newer, with NDEF tags. It pauses while you use the camera, Wallet or Apple Pay, or Airplane Mode is on, which is a common reason a tap seems to do nothing. Background reading is read-only, so writing happens inside an app such as NFCore.
If you tap and nothing happens, slide the tag slowly across the back of the phone rather than holding still.
4. Lock last
Locking a tag makes the record read-only. Some chips can use a password, and others can be locked permanently. Do not lock anything until you have tested on every phone that will use it. Our guide to password protection and permanent locking explains the difference. Keep a couple of spares unlocked for experiments.
Common problems and fixes
- Nothing happens on tap: check alignment with the antenna, remove the case, and move away from metal.
- The tag reads but will not write on iPhone: work through why an iPhone won't write a tag.
- The tag looks full or odd: it may already hold a record. Read it before overwriting.
- A card-style tag from an older kit behaves differently on your phone: on Android, MIFARE Classic and MIFARE Ultralight support is optional and depends on the device, and iPhone cannot read MIFARE Classic. NDEF-formatted tags avoid the issue.
Doing this on NFCore specifically
NFCore reads and writes NFC tags on iPhone and Android, with no account, and it does not upload your tags anywhere. The first-hour path above is what it's built for: scan, write, test, then lock when you're sure. To be straight about platforms: Android offers the full reader and writer stack, while iPhone is limited to what Core NFC allows. See iOS vs Android NFC for the details.
Get NFCore on the App Store or Google Play and scan your first tag today.
Frequently Asked Questions
Can I use a card-shaped NFC tag like a sticker?
Yes. The chip and antenna work the same whatever the shape. Cards are sturdier, stickers stick to surfaces, and both hold NDEF records.
Why does my new tag do nothing on the first tap?
Usually the phone's antenna is not lined up, or the tag is blank. Slide the tag slowly across the back of the phone and read it in NFCore first.
Should I lock the tag right after writing?
No. Test on both iPhone and Android first, then lock only the tags that are final.
Does NFCore need an account?
No. It does not require an account and it does not upload your tags.