Secret Santa With NFC Tags: Tap to Reveal Your Person
Write each drawn name to an NFC tag as plain text, lock it, and hand it out. Everyone taps their tag with a phone to see who they are buying for.
NFC Secret Santa tags turn the name draw into a small tap-to-reveal moment: you write each drawn name onto a tag as a text record, lock the tag, and hand it out. Each person holds their phone to their tag and sees who they are buying for. It takes about ten minutes for a group of eight, and it is a fun trick, not a secure vault. More on that limit below.
What you need for NFC Secret Santa tags
You need one tag per giver, a phone that can write tags, and the list of who is in the exchange.
Tags and a phone
Any NFC Forum Type 2 tag works, and the common NTAG213, NTAG215 and NTAG216 chips are the easy choice. NXP lists their user memory as 144, 504 and 888 bytes. A first name or a short note takes a few dozen bytes, so the smallest chip, NTAG213, is plenty. If you are unsure which to buy, our NTAG213 vs NTAG215 vs NTAG216 guide compares them.
Tags are passive. They have no battery: the phone's radio field powers them when you hold the phone close, which is why they can be stickers, cards, or tiny discs. Typical NFC range is a few centimetres (about 4 cm is the usual figure, and NXP quotes up to 100 mm for these chips), so you tap, you do not point from across the room.
You also need an app that can write tags. NFCore writes text records on both iPhone and Android, with no account and nothing uploaded.
A list of names
Decide the group first. Keep it simple: a list of names on paper, one per line. You will need exactly one tag per person, plus one or two spares for mistakes, because a locked tag with a typo cannot be fixed.
Writing one text record per tag
Draw names first, then write
Make the draw on paper first, and make sure nobody draws themselves. As organiser you will know every pairing, so pick someone neutral for the draw if that matters to your group. Then write each result onto a tag as an NDEF text record. A plain text record is the most compatible format, since every NFC phone knows how to show it. If you want to know how the language code and encoding fit in, see our guide on NDEF text records.
A good message is short and friendly:
You are buying for: Maya. Budget: 20. Reveal day: Dec 18.
Putting the budget and the date on the tag saves you answering the same two questions eight times. If you have never written a tag, the step-by-step guide to writing an NFC tag walks through it.
Check before you lock
After you write a tag, tap it with a second phone, or scan it again with the same one, and read what comes back. Check the spelling of the name. Then label the tag on the back with a small mark only you understand, such as the giver's initials, so you can hand the right tag to the right person.
Locking tags read-only
Locking is optional. For a gift exchange, though, it's a good idea. A locked tag cannot be rewritten by someone who gets curious, or by a friend who thinks it would be funny to change the name.
On Android, making a tag read-only is a one-way process. The platform documentation says it sets the read-only flag and, where possible, permanently sets the lock bits, and that this "cannot be reverted". NFC Forum tags can be in read-only or read-write states, and not every tag can be locked at all. That is why you test on a spare tag, read the result back, and only then lock the real ones.
NTAG chips also have an optional 32-bit password protection feature, which stops unauthorised writes without making the tag permanent. Our guide on password protection versus permanent locking explains the trade-off, and the guide on locking a tag permanently shows the steps and which phones can do it.
For a one-season Secret Santa, a lock is fine. If you plan to reuse the tags next year, keep them unlocked, or use a password.
Wrapping and handing out the tags
A tag is flat, so it hides well. Stick each one inside a card, on the back of a paper ornament, under a bow, or on a small card with "Tap me" printed on the front. Hand them out at the party, or put one in each person's stocking or mailbox.
The reveal is the fun part. Everyone holds their phone to their own tag, and the name pops up on screen. Print "tap here" on the card, because people don't always know where the tag sits. If the phone does not react, move it slowly over the card: the antenna is usually near the centre of the tag or the sticker.
If you like this kind of tag-based surprise, you could also build a tap-by-tap clue trail for the gift hunt itself, or see how tagging a gift with a note or playlist works.
What a Secret Santa tag can't keep private
This is the part to be upfront about: an NFC tag is not a secret keeper.
Standard NFC tags are not protected against reading. Any phone with NFC that is held close enough to the tag can read the text on it. Locking stops edits; it does not hide the content. So if a coworker picks up your tag and taps it, they see your name.
Here's what that means in practice:
- Anyone who holds the tag can read it. Treat the tag like a sealed envelope, not a safe.
- Do not put anything sensitive on it. Names for a gift exchange are fine. Addresses, phone numbers, or allergy details for someone else are not.
- Tags can be swapped or lost. If someone loses their tag, you will need the original list to remake it, so keep the organiser's list somewhere private.
The risk is low for a casual party, since a snooper has to be within a few centimetres. It suits family and friends. It suits a workplace less, where people get curious about each other's results.
Alternatives if you want real secrecy
If privacy matters more than the tap, keep the old method: names on folded paper, drawn in private. You can also use a tag only as a trigger, with the tag opening a link or a message that only works for that person. That's a different setup and needs a page behind the link, so plain text is simpler for most groups.
A middle path is to hide the tag until the reveal moment. Hand out the tags in sealed envelopes and ask everyone to open them at the same time, so nobody gets a head start and nobody can read another person's tag by accident.
Wrap up
NFC Secret Santa tags are a cheap, quick way to make the name draw feel like part of the gift. Write one text record per tag, check it, lock it if you want it fixed, and remember that anyone with a phone and the tag can read it. For a family or friend group, that is a fair trade for a tap-to-reveal moment.
To write your tags, get NFCore for iPhone or Android.
Frequently Asked Questions
Can anyone else read my Secret Santa tag?
Yes. Any NFC phone held within a few centimetres can read the text on a tag, locked or not. Locking stops changes, not reading. Treat the tag as a casual reveal, not a secret.
Which tag should I buy?
NTAG213 has 144 bytes of user memory, which is plenty for a short name and a note. NTAG215 and NTAG216 have 504 and 888 bytes if you want a longer message.
Can I undo locking a tag?
No. On Android, making a tag read-only is a one-way process and cannot be reverted. Check the text before you lock, and keep a spare tag for testing.
How close do I need to hold the phone?
About 4 cm is the usual NFC range, and NXP quotes up to 100 mm for NTAG chips. Hold the phone against the tag and move it slowly if nothing happens.