NFC Tags for a Craft Fair Booth: Care Cards and Reorder Links
A tag on your hang tag or care card can open care steps and a reorder page with one tap. Here is how to choose, mark, write, lock and test them before the market.
A tag on your product can open the care steps and your reorder page
Put an NFC tag on a hang tag or care card, write your care page link to it, and a shopper can tap it with a phone to read the instructions and reorder later. It costs a few cents per item, and the shopper installs nothing. This guide covers what to link to, how to mark the tap spot, how to write and lock the tags, and how to test the booth before the market opens.
Here's the usual story. Someone buys a candle or a wooden board from your booth, loves it, and then loses the care card by January. A tag that opens your care page, and a reorder link behind it, keeps working after the folding table is packed away.
Why NFC tags suit a craft fair booth
Tags are cheap, small and flat. NXP describes its NTAG 213, 215 and 216 chips as tag ICs for mass-market uses such as retail and smart advertising, and all three follow the NFC Forum Type 2 Tag standard, so phones are built to read them. The three chips differ mainly in user memory: 144 bytes for the NTAG213, 504 for the NTAG215 and 888 for the NTAG216.
For a booth, the NTAG213 is plenty. A short web address takes only a few dozen bytes, so you gain nothing from paying for a bigger chip. If you want the full comparison first, read our guide on writing the same link to a whole batch of tags.
An NFC tag won't replace a printed card or a QR code. Think of it as a second door to the same page. Some shoppers will tap, some will scan, and some will just read the card.
Care cards that people keep
What the care link should open
Link to one short page per product line: washing steps, how to trim a wick, when to re-oil the wood, how to store it. Make it readable with one thumb and put no sign-up wall in front of it. The shopper just bought from you and wants the answer fast.
Put your name and a way to reach you at the bottom of that page. It turns a care card into a quiet contact card too.
Card or tag on the product?
You have two sensible choices:
- A tag on the care card. The card sits in the bag or box, and the tag is hidden behind the print. This is the simplest setup and survives handling well.
- A tag on the hang tag or the product itself. Shoppers can tap right at the table, before buying, to see what the item is made of and how it is cared for.
If you are also selling gifts, a tag on the card can do double duty. Our guide to tap-to-read gift tags shows how to write a message tag, and the same steps work for a tap-to-read care guide written for a pet or a plant.
A reorder link that still works after the market
The reorder link is what turns a one-off sale into a repeat customer. Three habits keep it working:
- Link to a page that can take an order, not to your home page. A shopper who taps for a refill should land on the refill.
- One link per tag. On iPhone, Apple's Core NFC documentation says background tag reading processes only the first URL record in the tag's message, so put the care or reorder address first and do not rely on a second record being read.
- Use an address you control. If your shop moves, a short address on your own domain can be pointed at the new page, and the printed tags keep working.
You can use one tag for both jobs: link the tag to a small page that shows the care steps first and a reorder button below them. That keeps you to one link, one tag and one test.
Mark where to tap
Most shoppers have never tapped a tag at a booth. A mark shows them where. The NFC Forum recommends its Wayfinding Mark System, which it describes as showing that an item includes NFC and, more importantly, guiding the consumer where to tap. It has four variations, and the Directional version is described as most helpful for tags. The Standard version is the preferred general choice.
A few practical points:
- The Wayfinding Marks are free to license for members and non-members, but you need to complete the NFC Forum license agreement and download its Brand Guidelines. Placement and size rules are in those guidelines, so read them before you print.
- The older N-Mark is still licensed for established uses, but it is not the one the NFC Forum recommends for new work.
- If you would rather not license a mark, add a plain line of text such as "Tap here with your phone" and a simple arrow. The goal is the same.
NXP lists the operating distance of its NTAG chips as up to 100 mm, depending on field strength and antenna shape. Phones read best when they are close, so place the mark right over the tag, and keep the tag flat.
Write and lock the tags
Write the link in NFCore
In NFCore, choose to write a URL record, paste your care page address and hold your phone to each tag. The Android version is on Google Play. Write a few extra tags too: some will get scratched, some will get stuck on the wrong card, and you will want spares at the booth.
Check that the address opens in your phone's browser before you write it. A typo repeated across a hundred tags is the most common mistake, and the most annoying.
Test, then lock
NTAG chips can be locked read-only, and they also offer an optional 32-bit password to prevent unauthorised changes. NXP lists a write endurance of 100,000 cycles and a data retention time of 10 years. At a busy booth, a tag anyone could overwrite is a risk. Lock your tags once the link is final.
Treat the lock as permanent. Test every tag first on at least one iPhone and one Android phone, and only then lock it. If you may change the link later, point the tag at an address you control rather than rewriting hundreds of locked tags.
Test the booth setup before the market
Do a full dress rehearsal at home the evening before:
- iPhone: the screen needs to be on. Apple's documentation says a phone read while locked will ask the user to unlock first, and background reading pauses while Apple Pay or Wallet is in use, while the camera is in use, or in Airplane Mode. Tell shoppers to wake the screen if nothing happens.
- Android: NFC must be switched on in settings. Most phones read a URL tag with the screen on.
- Real products: test the tag on the finished item, inside its packaging. Metal tins, foil wrap and thick wood can weaken the read, so move the tag if a tap fails. This is practical advice from experience with tags, not a figure from a standard.
- A backup: keep a QR code or a short printed web address on the card in case a tap fails.
Once it works on the real product, drop a few spare tags in your cash box and you're set.
The short version
A craft fair booth is a good place for NFC tags: cheap NTAG213 chips, one short link per tag, a care page that is easy to read, a reorder button, a clear tap mark, and a test on real phones before you lock anything. Do that, and your care card keeps selling for you long after the market closes.
Frequently Asked Questions
Do I need an app to read my booth tags?
Most modern phones read a tag that holds a web link and open it with no app. On iPhone the screen has to be on, and a locked phone asks the shopper to unlock first. You only need an app such as NFCore on your side, to write and lock the tags.
Which tag chip should I buy for product tags?
The NTAG213 is enough for one short link. It offers 144 bytes of user memory, the NTAG215 offers 504 and the NTAG216 offers 888. All three follow the NFC Forum Type 2 Tag standard, so phones read them.
Can a shopper overwrite my tag?
Only if it is left writable. NTAG chips can be locked read-only and optionally password protected. Test the link first, then lock, because a lock is meant to be permanent.
Do I have to use the NFC Forum tap mark?
No rule makes you, but a mark tells shoppers where to tap. The NFC Forum recommends its Wayfinding Mark System, which is free to license after you complete its license agreement. Plain text such as "Tap here with your phone" also works.