Label Decoration Bins With NFC Tags: Tap to See What's Inside
Put an NFC tag on each storage bin and tap it to see what's inside. The tag holds a short link, the list sits behind it, and metal lids need care.
Introduction
You can label a decoration bin with an NFC tag: stick a small tag on the side, write a short link to it, and tap your phone to open a list of what's inside. No more opening five identical plastic bins to find the tree lights.
January is when this pays off. The decorations come down, everything gets boxed, and by next November nobody remembers which bin holds the ornaments and which holds the wreath. A handwritten label fades or gets lost under a lid. A tag keeps working, and you can edit the list behind it whenever the contents change. Here's what the tag actually stores, what belongs on the page behind it, where to put it, and why metal lids and foil need a different plan.
Why the tag holds a link, not the list
144 bytes is small
The tag most people buy for this is an NTAG213. It has 144 bytes of user memory, which WakDev's NTAG213 reference describes as room for an NDEF record with a URL of around 130 characters. The common start of a web address is compressed into a single byte by the NDEF format, so a short link goes a long way.
A full contents list won't fit. Forty ornaments, six strings of lights and a tree skirt would use the whole tag before you got to the cords. If you ever need more room for something else, our guide to NTAG213, NTAG215 and NTAG216 compares the three chip sizes. For bin labels, the smallest chip is plenty, because the tag is only an address.
The list lives behind the link
Treat the tag as a doorbell instead. It stores one short link. The link opens a page you control, and the page holds the list, a photo, notes and anything else you want. When you add a string of lights or throw out a broken ornament, you edit the page. The tag never needs rewriting.
It also keeps the write quick. One short link, one tag, one bin.
Set up one page per bin
What goes on the page
Keep each page short enough to read on a phone while standing in a closet. A useful page has:
- The bin number and the room or shelf where it lives
- A plain list of what's inside, grouped the way you pack it (lights, ornaments, wreaths, cords)
- Notes such as "fragile glass ornaments on top" or "spare bulbs in the small box"
- A photo of the packed bin, if you like seeing the layout before you open it
You can use any notes app, shared document or simple web page that gives you a stable link. Pick one place and stay with it, because the tag stores that exact address.
Naming and numbering
Use the same pattern for every bin: "Decor 1", "Decor 2" and so on, or one name per theme. Short, predictable links are easier to write and easier to fix later. If you already keep a similar tap-to-open checklist on a storm kit, you will recognize the idea from our winter storm kit tag guide: the bin carries the tag, and the tag opens the list.
Write the tags
Writing takes about a minute per tag. In NFCore you add a URL record, paste the link for that bin's page and hold the tag to the back of your phone. Then read it back once to confirm the link opens the right page before you stick the tag on. Our guide on how to write an NFC tag walks through the steps if it is your first time.
A few habits save trouble:
- Write and test all the tags at a table, not while standing in a cold garage with a bin in your arms.
- Test each tag by tapping, not just by checking the app's confirmation.
- Put a small number on the outside next to the tag so you can match a tag to its page if one ever stops opening.
NFCore is free to download for iPhone and Android, and it works without an account.
Where to put the tag on a plastic bin
NFC is a short-range technology. Wikipedia's overview describes it as communication over about 4 cm or less, and typically 10 cm or less, on 13.56 MHz. The NTAG213 reference lists an operating distance of up to roughly 10 cm, depending on the antenna and the reader. In daily use that means you touch the phone to the tag, you can't wave it from across the room.
That points to a few placement rules:
- Use a flat plastic side panel, near the handle or the end that faces out on the shelf.
- Skip the lid if bins are stacked, since the lid of a stacked bin is hidden.
- Keep the tag away from labels with metallic ink and from any metal hardware on the bin.
- Tell everyone in the house where it sits. A small dot or the bin number next to it works.
Phones differ in where the NFC antenna is, usually near the top back. If a tap does not register, slide the phone slowly over the tag rather than pressing harder.
Metal lids, foil and what to do instead
Plain plastic bins are easy. Metal is where the idea breaks, and decoration storage has plenty of it: cookie-tin style boxes for ornaments, metal lids on some storage cans, foil-wrapped breakables, and shelving.
Vendor explainers on NFC and metal agree on the cause: metal behind a tag interferes with the tag's antenna, so a standard tag stuck to a metal surface often reads poorly or not at all. The usual fix is an on-metal tag, which adds a layer of ferrite between the antenna and the metal. Those tags are thicker and cost more than plain stickers. Most of what has been published about their performance comes from sellers, so test one on your real surface with your real phone before you buy a whole batch.
For bins, the simplest plan is to avoid the problem:
- Put the tag on a plastic side of the bin, not on a metal lid.
- For a metal tin, stick the tag on a plastic bag, a cardboard divider or a plastic tag holder that sits on the outside, away from the metal, and test it.
- If a tin or can has to carry its own tag, use an on-metal tag and tap-test it first.
Our guide to NFC tags on metal goes deeper on what works. We don't give a read-range figure for foil or metal here, because it depends on the tag, the phone and the surface. The only reliable answer is a quick test.
Keep the list current
Because the tag only stores a link, upkeep is easy. When you pull out the lights for next year's tree, move them from the "in the bin" list to a "on the tree" note, or just delete them for the season. When you add something new, add a line to the page. The tag, and the sticker on the bin, stay as they are.
A once-a-year check helps. When you take the decorations down, spend five minutes with the bin open and the page in your hand, and fix any line that has drifted. If you want a bigger sweep of every tag you own, the January tag audit guide covers finding, rewriting and retiring old tags.
Conclusion
The tag stores the link and the page stores the list. Put the tag on a plastic side of the bin, write and tap-test it before you seal anything, and keep metal out of the picture or use an on-metal tag. After that, finding the right bin in November is a tap, not a treasure hunt.
Frequently Asked Questions
How much can an NTAG213 tag hold?
It has 144 bytes of user memory, which fits a URL of roughly 130 characters. That is plenty for a short link and not enough for a long list, so keep the list on the page behind the link.
Will the tag work on a metal lid?
A plain tag often reads poorly or not at all on metal. An on-metal tag, which has a ferrite layer, is made for that job, but test it with your own phone first. Or place the tag on a plastic side of the bin.
What happens if I change what is in the bin?
You edit the page the link points to. The tag does not need rewriting, because it only stores the link.
How close does the phone need to be?
NFC works over a few centimetres, and an NTAG213 is rated up to about 10 cm depending on the antenna and the reader. In practice, touch the phone to the tag.