Back to guides

Closing a Vacation Home for Winter: A Tap-to-Open Checklist Tag

A vacant home checklist NFC tag keeps the winter closing steps (water off, pipes drained, thermostat near 60 F) one tap away, even at a house with no signal.

Published

Quick answer

Write your closing steps as a short plain-text record on one NFC tag, stick it inside the door, and tap it with your phone on the way out. A winterize vacant home checklist NFC tag works because the list lives on the tag itself: no signal, no app login and no page to load at a house in the hills. The steps are the ones people forget at the end of a packing day: water off, pipes drained, thermostat set to around 60 F, and the house made to look lived in.

Below: what belongs on the list, how to write it, and how to share it with a helper. This isn't a leave-for-the-holidays tag or a storm kit tag. It does one job: close the house.

What belongs on a vacant-home winter checklist

The steps below come from two home-care guides, American Home Shield (AHS) and Progressive's Lifelanes. Treat them as a starting list, then adjust for your house, your climate and your insurer's rules.

Water first

AHS calls shutting off the water supply the most important step. Find the main valve, which is usually outside in a utility box or near the foundation. If the house runs on a well, flip the pump breaker instead. If you can't shut the water off completely, AHS suggests leaving a small trickle running at faucets at opposite ends of the home.

Then drain the lines: open every faucet and flush every toilet until only a slow drip remains. Flush once more after the tanks empty to clear the bowls. If you are shutting off the water heater, drain it too, and disconnect garden hoses.

Heat and pipes

Don't turn the heat off. AHS suggests setting the thermostat to around 60 F, and says pipes can start to freeze when outdoor temperatures drop to around 30 F or lower. It also notes that keeping a home at 55 to 60 F or warmer can help prevent freezing. Wrap exposed pipes in garages, basements and crawl spaces with foam or fiberglass insulation, and seal gaps around pipe openings.

Power, appliances and looking lived in

If the power stays on, unplug TVs, microwaves and coffee makers. Empty the trash and clear perishables out of the fridge. A vacant house in winter draws attention, so AHS suggests lamp timers or smart plugs, motion-sensor outdoor lights, a quick test of alarms and sensors, forwarded mail and arranged snow removal.

Steps to leave to a professional

Progressive's list for a vacant or unheated home goes further: blowing out supply lines with an air compressor, pouring non-toxic RV antifreeze into toilets and drains afterward, turning off the building's electricity, and posting "Winterized. Do not use plumbing." signs by sinks and toilets. Progressive's page itself says to consult professionals before doing home maintenance. Check with a plumber and your insurer before you try any of it, and leave those lines off your tag if someone else does that work.

Step-by-step: build the checklist tag

  1. Draft the list in short lines. Aim for ten items or fewer, one action each. "1. Main water OFF. 2. Open faucets, flush toilets. 3. Drain water heater. 4. Thermostat 60 F. 5. Unplug appliances. 6. Empty fridge and trash. 7. Lamp timers on. 8. Alarm armed. 9. Mail forwarded." Short lines read well on a phone screen and fit on a small tag.
  2. Pick the tag. A plain-text checklist is small, but longer lists need more room, so check the memory sizes in NTAG213, NTAG215 or NTAG216. An NTAG215 gives you plenty of space for a ten-line list.
  3. Write it as a text record, not a link. A link needs a connection to load the page. A text record is stored on the tag and shows up the moment you tap it, which matters at a vacation home where mobile coverage may be poor. If you have not written a tag before, here is how to write an NFC tag with your phone.
  4. Read it back. Tap the tag with an iPhone and an Android phone if you have both, and confirm every line appears with no cut-off text.
  5. Lock it, then stick it. Lock the tag so nobody can overwrite your list by accident, and fix it inside the front door or on the utility cabinet, where your hand already goes when you leave.

Next autumn the same tag does the same job. If a step changes, such as a new shutoff location, write a new tag rather than relying on memory.

Sharing the tag with a helper or caretaker

Any NFC-capable phone can read a text record, so your neighbor, a property manager or a house sitter can tap the tag without installing anything. That's the point of putting the list on the door. Whoever is last out, or whoever checks in mid-winter, sees the same steps in the same order.

If someone is also looking after pets or plants, pair this tag with a tap-to-read care guide for a house sitter so the two jobs stay on separate tags. Don't store alarm or door codes on the tag. Anyone who taps it can read a text record, so keep the list to steps, not secrets.

Common problems and fixes

  • The text is too long for the tag. Trim to short lines, or move to a larger tag. Ten short lines is a comfortable target.
  • It won't read on a metal surface. A utility cabinet door or metal frame can block the signal. Stick the tag to a non-metal spot, or use a tag made for metal.
  • Cold or damp garages and porches. If the tag will sit somewhere that gets wet, look at waterproof tags and what the ratings mean.
  • The tap seems to do nothing. On iPhone, a tag read shows a notification you have to tap to open it. On Android, the screen needs to be unlocked. Hold the top edge of the phone against the tag.
  • You forgot to update the list. A tag is only as current as its last write. Reread it every autumn.
  • No phone available. Keep a paper copy somewhere sensible too. The tag is a convenience, not your only record.

Doing this on NFCore specifically

In NFCore, choose Write, add a Text record, paste your short list, write it to the tag and read it back to check it. Then lock the tag from the same screen. NFCore keeps everything on your device: no account, no cloud upload and no tracking. On iPhone, writing is limited by what Core NFC allows, so if a write fails, check the tag type first. Android has the full read and write stack.

You can get NFCore for iPhone or Android.

Conclusion

One tag by the door turns the end-of-trip scramble into a single pass down a list: water, heat, power, security. The steps come from home-care guidance. The tag just makes sure you see them when it counts. This guide is not a substitute for a plumber's advice or your insurer's vacancy rules, so check both for your house before you close it for the season.

Frequently Asked Questions

What temperature should I leave the thermostat at in a vacant home?

AHS suggests around 60 F rather than turning the heat off, and says keeping a home at least 55 to 60 F can help prevent freezing. Pipes can start to freeze when outdoor temperatures fall to around 30 F or lower.

Should I drain the pipes or just shut off the water?

For a home left empty, do both. Shut off the main supply, then open faucets and flush toilets until only a slow drip remains. Progressive's vacant-home list adds draining the water heater and blowing out the lines, which is work to confirm with a plumber.

Does the tag need internet to open the checklist?

Not if the checklist is stored as a plain text record on the tag itself. A tag that holds a link needs a connection to load the page.

Can a house sitter or neighbor use the same tag?

Yes. Any NFC phone can read a text record. If you lock the tag, the helper can read the list but can't change it.