Back to guides

Where Did I Park? An NFC Tag That Saves Your Airport Parking Spot

Tap an NFC tag in your car after parking and an iPhone Shortcut saves your spot in Maps. Set it up in five minutes before your next airport trip.

Published

An NFC tag can save your airport parking spot: stick it somewhere in the car, build a Shortcuts automation that runs when you tap it, and the shortcut records your current location as your parked car in Maps. One tap after you lock up, and ten days later you can ask Maps where you left the car.

Holiday lots are the worst case. Rows look identical, the shuttle ride blurs everything, and you come back tired, maybe in the dark. This guide covers the iPhone setup, which takes about five minutes and one sticker.

Quick answer

You need three things: a blank NTAG215 sticker, an iPhone, and a shortcut that saves your location as the parked car. The tag is just the trigger. The automation in the Shortcuts app does the work.

Before you build anything, know what Apple already does. According to Apple's Maps support page, an iPhone 6 or later on iOS 10 or later can drop a parked car marker on its own when you disconnect from your car's Bluetooth or CarPlay. If your car pairs with your phone, that may be all you need.

The tag earns its place in the cases where that falls short:

  • a rental car you never paired
  • an older car with no Bluetooth
  • a ride where you parked and walked off without a Bluetooth disconnect you would notice
  • a second driver who wants the same habit

It also gives you a deliberate moment. A tap is you saying "this is where I parked", and that beats hoping a background feature fired. If you are packing for the same trip, the packing list tag on your suitcase uses the same tap-to-run idea.

Step-by-step

What you need

  • One NTAG215 sticker. It is a common, cheap tag with far more memory than this job needs. A trigger that only has to be recognized needs almost nothing, so any working NFC tag will do. If you are unsure what to buy, read buying NFC tags online first.
  • An iPhone with Shortcuts (it ships with iOS).
  • A few minutes at the car or on the couch.

Turn on Maps parked location first

Even if you plan to rely on the tag, switch this on. Per Apple's steps:

  1. Open Settings, then Privacy & Security, then Location Services, and make sure Location Services is on.
  2. Inside Location Services, open System Services and turn on Significant Locations (called Significant Locations & Routes on some versions).
  3. Go to Settings, then Apps, then Maps, and turn on Show Parked Location.
  4. Optional: in Settings, then Notifications, then Maps, allow notifications.

Now Maps has a "Parked Car" entry to show. To find it later, search for "Parked Car" in Maps, or tap the Search field on your Home Screen and pick Parked Car under Siri Suggestions.

Build the NFC automation

  1. Open Shortcuts and switch to the Automation tab.
  2. Create a Personal Automation and scroll to NFC.
  3. Tap Scan and hold the tag near the top of your iPhone. Give the tag a name you will recognize, such as "Car parking tag".
  4. Add the action Run Shortcut and choose your parked car shortcut (next section).
  5. On the final screen, turn off Ask Before Running so it fires without a prompt.

Apple's Shortcuts guide lists NFC among the triggers that can run automatically, and adds a catch: you may also need to set individual actions to run automatically. If it still asks you to confirm, open the shortcut, tap its Info button, open Privacy, and turn on Allow Running When Locked. Then tap the tag again.

One more detail from a hands-on walkthrough: the screen has to be on for the tag to be read, but it works whether the phone is locked or unlocked.

The parked car shortcut

The shortcut the automation runs has one job: take your current location and save it as the parked car in Maps. A community shortcut called Set parked car does exactly that. Its description says it inputs your current location as where you parked in the Maps app, and the same gallery has companions such as Where did I park? and Take me to my car.

Two honest notes. First, it saves where your phone is right now, so tap while you're standing at the car. Tapping at the terminal saves the terminal. Second, check any shortcut you import before trusting it: open it, read each action, and run it once in your driveway to see the pin land where you expect.

Where to stick the tag

Pick a spot you reach naturally as you get out and close the door. Good options:

  • the inside of the driver's door frame
  • the sun visor
  • the dashboard near the windshield, out of direct sun
  • the back of a phone mount

Keep it within easy reach, because tags are read from roughly an inch and a half away. Avoid sticking it directly on bare metal if you can: metal can interfere with the tag's antenna, and a thin foam spacer helps. Test the tap in the real spot before you rely on it.

Common problems and fixes

The pin dropped in the wrong place

The shortcut saves wherever the phone is at the moment of the tap. Tap beside the car, not after the shuttle stop. If you drive into a multi-level garage, GPS can be poor; add a quick note or photo of the level and row as a backup.

The automation asks for confirmation

Open the automation and check that Ask Before Running is off. Then open the shortcut and look at its Privacy settings, as above. Apple notes that automations do not always run without asking by default, so a prompt is a settings issue, not a broken tag.

Nothing happens when you tap

Wake the screen first. Hold the tag near the top edge of the phone, where the antenna sits, and take off any thick case or metal plate. Then re-scan the tag inside the automation to confirm it still reads.

Rental cars and shared vehicles

A tag is the best fit here, since you never paired the car. Peel-and-stick tags can be moved, so keep a tag in your travel bag and put it on the visor of whatever you are driving. The guide to NFC tags in a rental car covers that use in more detail.

Your partner's phone

Automations are specific to each device. Apple says they back up to iCloud but sync to other devices disabled, so everyone who wants the tap has to set it up on their own phone.

Using the tag for more than parking

The same sticker can only trigger one automation on your phone, but you can make that shortcut do more. For a trip, pair it with the flight details tag so the gate and confirmation number are one tap away on the way in.

Doing this on NFCore specifically

Your iPhone's Shortcuts app handles the automation. NFCore handles the tag itself, with no account and no cloud upload.

Use NFCore to:

  1. Read the blank tag and confirm it is an NTAG215 (or another type your phone supports) with room to spare.
  2. Write a short text record to it, such as "Airport parking: tap after you park". If the tag ends up in a drawer or on a different car, anyone who finds it knows what it was for.
  3. Test the read, so you know the tag works before you leave for the trip.
  4. Lock the tag if you do not want it overwritten.

Do the tap test at home, then at the real spot in the car. If you want to write and check your own tags, you can get NFCore for iPhone or Android.

A limit worth knowing: this guide is iPhone focused because the Shortcuts NFC trigger is an iOS feature. On Android, tag-triggered routines depend on your phone and the automation app you use, so the steps differ.

Conclusion

Maps can save your parked car by itself when your phone disconnects from the car's Bluetooth or CarPlay, and you should leave that on. A tag in the car adds a deliberate second path: tap after parking, and your current location becomes the parked car. It costs one sticker and about five minutes. It also works in rentals and older cars, where Bluetooth does nothing for you. Set it up at home, test it in the car, and check Maps for "Parked Car" before you board.

Frequently Asked Questions

Does the tap work with the phone locked?

Yes, with a condition. In a hands-on walkthrough the screen needed to be on, and the tap worked whether the phone was locked or unlocked. Apple's Shortcuts guide says NFC automations can run without asking, but you may also need to set individual actions to run automatically.

Do I need a tag if Apple Maps already saves my parked car?

Maps drops its marker when your iPhone disconnects from your car's Bluetooth or CarPlay, and it also needs Location Services and Show Parked Location turned on. If the car never paired, such as a rental, there is no disconnect to detect, so a tap is the fallback.

What tag should I buy?

A basic NTAG215 sticker is plenty. A single automation trigger needs almost no memory, and the tag only has to be read from about an inch and a half away.

Where do I find the saved spot later?

Open Maps and search for "Parked Car", or tap Parked Car under Siri Suggestions on the Home Screen.