Back to guides

Red Kettle Tap to Give: Donate to the Salvation Army by Phone

How Salvation Army Red Kettle tap to give works: the NFC tag on the sign, Apple Pay and Google Pay, card taps, and what to check before you donate.

Published

Introduction

Many Salvation Army Red Kettles have let you give by phone since 2019. You tap your phone on an NFC tag on the kettle sign (or scan a QR code), pick an amount, and confirm with Apple Pay or Google Pay. The program is called Kettle Pay, and it is a good everyday example of what an NFC tag does. It holds a web address. Nothing more.

One caveat first. The sources we could verify date from 2019 to 2021, and we found no current-season numbers. Setups differ by location, so the sign at your kettle is the final word on what it supports this year.

Here's how the flow works, what sits inside the tag, why it survives a metal stand in winter, how a tag tap differs from a card tap, and what to check before you donate.

How Salvation Army Red Kettle tap to give works

Three ways to tap or scan

Kettle Pay went nationwide for the 2019 holiday season. According to American Banker and NFCW, the Salvation Army put contactless technology on about 25,000 Red Kettles. The first version used QR codes in a pilot in select markets in 2018. The NFC option was added because tapping a phone felt more natural to shoppers who already pay that way, as RFID Journal reported in January 2020.

So there are three ways you may meet tap to give at a kettle:

  • Phone to tag: you hold an NFC phone to the tag in the kettle sign (the Kettle Pay flow from 2019).
  • QR code: you scan the code printed on the same sign with your camera.
  • Card, phone or watch on a terminal: a 2021 pilot used small payment devices, covered in the card tap section below.

What you see when you tap

The Salvation Army's November 2019 announcement describes a custom donation page that accepts Apple Pay or Google Pay. You choose a preset amount or type your own, then confirm in your wallet. RFID Journal reports that payments ran on Braintree.

Two details from that announcement are worth knowing. Funds go to local Salvation Army units based on the donor's billing ZIP code, so your gift is routed to your area. And an email receipt is sent to the donor.

What is inside the kettle's NFC tag

An NDEF URL on an ISO 14443 tag

RFID Journal describes the tags as 13.56 MHz tags compliant with ISO 14443, the same family of standards behind most NFC stickers and cards. Each tag has a unique ID and carries an NDEF URI record, the standard way to store a link on a tag. That record is why the same tag works on both iPhone and Android: both phones know how to read NDEF and open a URL.

In the 2019 setup, the phone sends the tag's encoded ID to a server, which authorizes the payment through the processor. The tag never holds your card, your name or your money. It's a link with an identifier. The payment happens in your wallet.

You can read the tag yourself

Because it is a plain NDEF record, you can see what a kettle tag contains before you open it. An NFC reader app such as NFCore shows the stored URL and record type without opening the page, which is a useful habit with any tag you did not write yourself. NFCore is built for exactly this kind of inspection, and it reads tags on-device without an account or any upload.

Why the kettle tag is built for metal and winter

A standard NFC tag does not work well when it is stuck on metal, because the metal interferes with the antenna. Red Kettle signs are metal and they stand outside in December, so the tags needed to be different.

GoToTags, the supplier, described using an on-metal NFC token with a 3M adhesive backing. RFID Journal adds that the round tag measures 30 millimeters (1.2 inches) and was made to hold up to winter weather outdoors. The supplier also had about a month to pre-encode more than 50,000 tags before the November 2019 launch.

If you want to know how ordinary tags behave when it gets cold, we have a separate guide on how NFC tags behave in freezing temperatures. For kettles, the metal is the bigger problem than the weather, which is why a special tag was chosen.

Tag tap versus card tap

In November 2021, Visa, the Salvation Army and tiptap announced a different approach. Instead of a tag that opens a web page, shoppers tap a contactless card, phone or watch directly on a tiptap device. Visa said the pilot would run at nearly 2,000 Red Kettle stations across the East and West Coasts, including Washington D.C., Southern California, San Francisco and Sacramento. The donor chooses the amount and taps, and the release says it can take seconds.

The difference is simple:

  • Tag tap: a passive tag stores a URL. Your phone reads it, opens a page, and you pay through Apple Pay or Google Pay.
  • Card tap: the kettle has an active payment terminal. tiptap describes its device as NFC-enabled and working as an autonomous point of sale, so you pay it directly with a card, phone or watch.

Cards talk to terminals using a different layer of NFC. If you are curious about the protocol, our guide on how ISO-DEP tags and cards work explains the part that lets a card answer a terminal.

Make your own donation tag

The kettle idea scales down too. A club, a school or a charity table can write a donation page link to a tag and put it on a sign. Our guide to a one-tap donation tag for your own fundraiser walks through it. Only link to a page you control, and test the tag on both an iPhone and an Android phone before you rely on it.

Using it safely

A few habits make any tap-to-pay moment safer:

  • Check that the sign looks official and that the tag has not been covered by another sticker.
  • Look at the payment sheet. Apple Pay or Google Pay should name who you are paying before you confirm.
  • Look at the page that opens. It should clearly be The Salvation Army's donation page.
  • If anything looks off, skip it and give another way. The 2019 announcement listed online giving and texting KETTLE to 91999, but check The Salvation Army's own site for the current options.

No setup is risk free. Treat a tap like any other payment and confirm the payee and the amount first.

Conclusion

Red Kettle tap to give turns a metal sign into a small web link: tap the tag, pick an amount, confirm in Apple Pay or Google Pay. The idea started as Kettle Pay in 2019 and grew to include card taps in a 2021 pilot. Check your local kettle for what it supports this season. If you want to see what is stored on an NFC tag before you tap, you can read it with NFCore on iPhone or Android.

Frequently Asked Questions

Do I need the NFCore app to donate at a Red Kettle?

No. Your phone's built-in NFC reader handles the tag, so you tap and the donation page opens in your browser. NFCore is only useful if you want to inspect what the sign's tag contains.

Does tap to give work on an iPhone?

The 2019 Kettle Pay flow was built for both iPhone and Android, with a tag holding an NDEF URL record and Apple Pay or Google Pay on the donation page. Recent iPhones read such tags in the background, and the QR code on the sign is a fallback if a tap does not register.

Where does my donation go?

The Salvation Army said in its 2019 announcement that funds go to local units based on the donor's billing ZIP code, and that an email receipt is sent to the donor.

Is every kettle set up for tap to give?

No. Our sources describe a nationwide rollout in 2019 and a card-tap pilot at nearly 2,000 stations in 2021, and we found no current-season figures. Check the sign at your kettle to see which options it offers.